Home
Videos uploaded by user “DeBergerac Design”
Jimbos Miller Welding Mask Review
 
05:14
In this weeks video Jim reviews and discusses the benefits of using a Welding Mask instead of a Welding Shield. I if you like this video be sure to give it a thumbs up and also don't forget to subscribe! Our most recent video! https://www.youtube.com/watch?v=gp6TAHMT8pM
Views: 8675 DeBergerac Design
How to create perfect corners using custom corner Jigs
 
11:07
In this weeks episode, Jim demonstrates how to deliver perfect corners using custom corner jigs made the Debergerac Way. Feel free to subscribe and leave your feedback below! Last weeks episode https://youtu.be/gwypapXBENc Also some of the tools used in the shop here are linked below Festool router - https://www.youtube.com/channel/UCW3fiU8qsBuJhSl2jkuGy0w
Views: 194241 DeBergerac Design
Is a Domino joint stronger?
 
06:04
Is a domino joint stronger?! I this weeks episode Jim stress tests a Domino VS Regular S curve joint, bonded with West System epoxy By Stacking weights on either side. The results may shock you! This is the same joint used in our corner moldings video... https://youtu.be/v3cHjidnNwc Here is last weeks video... https://youtu.be/QYOpy0z6Gl4 West System Epoxy used in this video... http://www.westsystem.com/the-105-system/product-selection-guide/ Also some of the tools used in the shop here are linked below Festool router - https://www.youtube.com/channel/UCW3fiU8qsBuJhSl2jkuGy0w
Views: 15305 DeBergerac Design
How to create Intricate Corners Using Woodworking Jigs
 
19:49
Intricate corners are no match for Jim when he uses his custom made woodworking Jigs! This video was made as per popular demand based on the corners done on this video from a few weeks ago, check it out! https://youtu.be/v3cHjidnNwc Here is last weeks video! https://youtu.be/w09t-ROvDcY Also some of the tools used in the shop here are linked below Festool router - https://www.youtube.com/channel/UCW3fiU8qsBuJhSl2jkuGy0w
Views: 11746 DeBergerac Design
A Hard Road To Sobriety
 
07:24
A hard road to sobriety is a story of you humble host Jim Lacourse and the incident that led him to decide to lead a sober lifestyle afterwards. Here is our last video https://www.youtube.com/watch?v=LwLElwDQ_NI
Views: 1460 DeBergerac Design
Aft deck table fly leaf design Part.1
 
14:37
Aft deck table in a fly leaf design done by Jim here at DeBergerac Design. This is the second half of the video and showcases the job being finished. To see the Part two, Click link below!!! https://youtu.be/GvTT849ld4M For further instructions on how to perfectly cut the corners like in the table from this video, Check out this video VIA the link below on how to do just that!!! https://youtu.be/v3cHjidnNwc Also is a video done on THIS EXACT TABLE for the best method for cutting perfectly fitted SOSS hinges, check it out! Linked Below!!! https://youtu.be/kEf82QnVsJk
Views: 1876 DeBergerac Design
SOSS Hinges Perfect Fit!
 
04:16
Soss hinges can be fitted perfectly with direction from Jim at DeBergerac Design! Check out last weeks episode here! https://youtu.be/v3cHjidnNwc Also how to use a FESTOOl ROUTER to install SOSS hinges! https://youtu.be/2CRk1s0S4-Q Also some of the PRODUCTS used in the VIDEO here are linked below. SOSS HINGE https://www.amazon.com/dp/B008FL39HM/ref=cm_sw_r_tw_dp_x_DO3czbWJQVPP2
Views: 2663 DeBergerac Design
3m 5200 Should You Use it?
 
05:55
In this week episode Jim is sent out to retrieve a table off a boat. But comes to find out it was glued down! So he showcases the IMPROPER use of 3M 5200 Adhesive, and how to deal with it. Check out our most recent video! https://youtu.be/gf5yu19UcOY Also some of the tools used in the shop here are linked below Festool router - https://www.youtube.com/channel/UCW3fiU8qsBuJhSl2jkuGy0w
Views: 12959 DeBergerac Design
Custom teak table (Refinish and Install)
 
09:15
Custom teak tables are refinished and installed on a Sunseeker Yacht in this weeks video on the DeBergerac Channel! Last weeks video https://youtu.be/3MQw50IgLto
Views: 7540 DeBergerac Design
Building a three tool vise stand the Jimbo way
 
11:50
Looking to make you own Tire Vise Stand? Well look no further! In this weeks episode of the DeBergerac Channel Jim walks us through the steps necessary to make an exceptional TRIPLE THREAT TIRE VISE STAND! Check out our most recent video! https://www.youtube.com/watch?v=CInv7XgFWjA&t=5s Also some of the tools used in the shop here are linked below Festool router - https://www.youtube.com/channel/UCW3fiU8qsBuJhSl2jkuGy0w
Views: 2176 DeBergerac Design
Teak Cabinetry In Miami
 
04:50
Jim installs teak cabinetry in miami in this weeks episode and showcases other work that was done in the penthouse condo of his client. For the cabinet assembly check out 0:56 For the penthouse walk through check out 2:13 For the hidden TV and Liquor Cabinet check out 2:54 For the teak art display check out 3:27 For the maple face dresser check out 3:40 For the teak sliding storage shelfs see 4:04 For the teak chest check out 4:25 For the teak hidden broom closet check out 4:36 Also here is a link to last weeks video! https://youtu.be/pNpye3Lu7n0 Also some of the tools used in the shop here are linked below Festool Tools https://www.youtube.com/channel/UCW3fiU8qsBuJhSl2jkuGy0w
Views: 1391 DeBergerac Design
Aft deck table fly leaf design Part.2
 
14:42
Aft deck table in a fly leaf design done by Jim here at DeBergerac Design. This is the second half of the video and showcases the job being finished. To see the Part One, Click link below!!! https://youtu.be/pNpye3Lu7n0 For further instructions on how to perfectly cut the corners like in the table from this video, Check out this video VIA the link below on how to do just that!!! https://youtu.be/v3cHjidnNwc Also is a video done on THIS EXACT TABLE for the best method for cutting perfectly fitted SOSS hinges, check it out! Linked Below!!! https://youtu.be/kEf82QnVsJk
Views: 18333 DeBergerac Design
Machining Acrylic Manually Completed Vanity
 
08:49
Machining acrylic manually is not a problem here at DeBergerac Design, in a matter of minutes Jim cuts, shapes and polishes Acrylic that can either be used as a final piece or a template for cutting. And a special viewing at the end of the completed Vanity from a video a few month back. Feel free to leave your comments and questions below! Thanks for watching! The corners video https://youtu.be/v3cHjidnNwc Another video on how to cut acrylic https://youtu.be/9StfvHKH4Jg Last Weeks Video https://youtu.be/dncwK-VGdts Also some of the tools used in the shop here are linked below Festool router - https://www.youtube.com/channel/UCW3fiU8qsBuJhSl2jkuGy0w
Views: 2190 DeBergerac Design
How to build cafe racer
 
17:19
A Cafè racer is being worked on here at DeBergerac ! Jim walks us though how he custom built Ducati parts unto a Kawasaki frame. It can be a little tricky doing custom builds from parts that are from two different companies. But here at DeBergerac Design we always find a way! Here is part 1! https://www.youtube.com/watch?v=LwLElwDQ_NI&t=4s
Views: 42654 DeBergerac Design
How To Make A Round Wooden Cabinet PT1
 
06:35
In this week episode Jim shots us how to start building a mold for a rounded wooden cabinet. As well as the progress on the Yacht him and his crew are currently working on! Check out our most recent video! https://youtu.be/WXRx5anIk50 Also some of the tools used in the shop here are linked below Festool router - https://www.youtube.com/channel/UCW3fiU8qsBuJhSl2jkuGy0w
Views: 1231 DeBergerac Design
Portugal VS JIMBO!
 
07:58
In this weeks episode Jimbo goes to Portugal! Enjoy! Instagram www.instagram.com/yachtcarpentry Facebook https://www.facebook.com/DeBergerac-Design-302653070270559/ Also Jim we showcase the work Jimbo and the crew did on the latest Yacht! Thanks again for all the views and comments! Check out the most recent video! https://youtu.be/EiXGJvRHA0M Also some of the tools used in the shop here are linked below Festool router - https://www.youtube.com/channel/UCW3fiU8qsBuJhSl2jkuGy0w
Views: 314 DeBergerac Design
Texas Redo Update! Its Fixed!
 
11:38
Jimbo is Flippin excited to show you guys the new updates to his house in Texas!!! Check out the first Texas Video! https://youtu.be/WXRx5anIk50 Also some of the tools used in the shop here are linked below Festool router - https://www.youtube.com/channel/UCW3fiU8qsBuJhSl2jkuGy0w
Views: 494 DeBergerac Design
Cafè Racer (How to build your own!)
 
05:04
A Cafè racer is being worked on here at DeBergerac ! Jim walks us though how he custom built Ducati parts unto a Kawasaki frame. It can be a little tricky doing custom builds from parts that are from two different companies. But here at DeBergerac Design we always find a way! Here is last weeks video https://youtu.be/mYHKvvKNI1I And the week before that https://youtu.be/fAPWbrz807o
Views: 2748 DeBergerac Design
Refinishing a log mirror
 
04:40
Refinishing a log mirrorr is done in this weeks episode of the DeBergerac channel. Jim walks us through every step of the way! Also some of the tools used in the shop here are linked below Last weeks video! https://youtu.be/fUor3xLvN3o Festool router - https://www.youtube.com/channel/UCW3fiU8qsBuJhSl2jkuGy0w
Views: 832 DeBergerac Design
Fabricating a Mahogany Dog Gate (Pt1)
 
08:27
Fabrication is a breeze for Jim here at DeBergerac design! In this video he begins the assemble of a Mahogany dog gate for a yacht by fabricating the frame. Here is part 2 of the Dog Gate Video! https://youtu.be/3QxQR2dNi04 Check out out last video! https://youtu.be/8ZJGfs4xofo Also some of the tools used in the shop here are linked below Festool router - https://www.youtube.com/channel/UCW3fiU8qsBuJhSl2jkuGy0w
Views: 842 DeBergerac Design
Flush mounting a drain (Easy)
 
05:20
Flush mounting a drain in a working Galley on a yacht is nothing for Jim here at DeBergerac Design to accomplish! Check out out last video! https://youtu.be/USKZfQmMrzc Also some of the tools used in the shop here are linked below Festool router - https://www.youtube.com/channel/UCW3fiU8qsBuJhSl2jkuGy0w
Views: 791 DeBergerac Design
After Hurricane Irma
 
03:43
Jim talks us through his experience with Hurricane Irma, and we see some of the destruction that came along with it. Check out our most recent video! https://youtu.be/jL6BlizAeO4 https://www.youtube.com/watch?v=CInv7XgFWjA&t=5s Also some of the tools used in the shop here are linked below Festool router - https://www.youtube.com/channel/UCW3fiU8qsBuJhSl2jkuGy0w
Views: 606 DeBergerac Design
Welcome Back! 2018 Projects!
 
04:20
Welcome back to the DeBergerac Channel! We hope you have all had a safe and happy new year! Now its 2018 and we are back to showcase some of the upcoming projects and teach you through tutorials! Check out our most recent video! https://youtu.be/IbeWQcIwZng Also some of the tools used in the shop here are linked below Festool router - https://www.youtube.com/channel/UCW3fiU8qsBuJhSl2jkuGy0w
Views: 602 DeBergerac Design
VIDEO 2: How to use a FESTOOL Router for SOSS Hinge Installation
 
15:39
FortLauderdaleYachtCarpentry.com | (850) 6-YACHTS | [email protected] This is the 2nd demonstration video on How to Install SOSS Hinges. This demonstration will show you how to use a FESTOOL Router to install SOSS Hinges.
Views: 5092 DeBergerac Design
Vanity Cabinet Doors Made Easy
 
18:58
Vanity Cabinet Doors are perfectly installed with ease in this episode on the DeBergerac Design channel! Check out out last video! https://youtu.be/H9zwKoK0Z1w Also some of the tools used in the shop here are linked below Festool router - https://www.youtube.com/channel/UCW3fiU8qsBuJhSl2jkuGy0w
Views: 2883 DeBergerac Design
Rebuilding a Yacht Helm Station: Part 2
 
06:58
Rebuilding a yacht helm station is no easy task, But here at DeBergerac, it is not match for Jim's master carpentry skills! Check out out last video! https://youtu.be/xtU3IR-TOt4 Also some of the tools used in the shop here are linked below Festool router - https://www.youtube.com/channel/UCW3fiU8qsBuJhSl2jkuGy0w
Views: 1286 DeBergerac Design
Current Projects This Week!
 
02:32
Jim walks us through a couple projects that Debergerac has in the shop the last week of March 2017.
Views: 560 DeBergerac Design
Barn Style Sliders
 
08:21
On this week episode Jimbo showcases how to create and install a slider system for barn style doors for some closets at the Hillsboro Home! Instagram www.instagram.com/yachtcarpentry Facebook https://www.facebook.com/DeBergerac-Design-302653070270559/ Also Jim we showcase the work Jimbo and the crew did on the latest Yacht! Thanks again for all the views and comments! Check out the most recent video! https://youtu.be/EiXGJvRHA0M Also some of the tools used in the shop here are linked below Festool router - https://www.youtube.com/channel/UCW3fiU8qsBuJhSl2jkuGy0w
Views: 398 DeBergerac Design
Fitting and Gluing Acrylic (Made Easy)
 
11:15
Gluing and Fitting Acrylic has never been easier! In this weeks episode Jim talks us through step by step on how to properly fit and glue the bottom to an acrylic trash bin! More Acrylic Videos! https://youtu.be/yC1b6XPJaPI https://youtu.be/w09t-ROvDcY Check out out last video! https://youtu.be/DfboLFGLN_o Also some of the tools used in the shop here are linked below Festool router - https://www.youtube.com/channel/UCW3fiU8qsBuJhSl2jkuGy0w
Views: 1912 DeBergerac Design
Part 2   How to use FESTOOL Jigsaw cutting PVC Board Security Camera Housings
 
11:40
This video is part 2 of 3 and will demonstrate how to remove most of the PVC with a FESTOOL Jigsaw to make it easier on the the bandsaw and for milling.
Views: 720 DeBergerac Design
Improve furniture with paint!
 
10:09
Improve your furniture fast with a quick paint job! Jimbo also showcases in this weeks video a couple techniques to get your furnishings o look perfect for your space! Enjoy! Check out the most recent video! https://youtu.be/yaACJZTNBOg Also some of the tools used in the shop here are linked below Festool router - https://www.youtube.com/channel/UCW3fiU8qsBuJhSl2jkuGy0w
Views: 410 DeBergerac Design
Glass Sink Repair
 
10:55
In this weeks video Jimbo shows us how to repair a chip in a glass sink from a Yacht. Done without filler of any kind and looks like new! Instagram www.instagram.com/yachtcarpentry Facebook https://www.facebook.com/DeBergerac-Design-302653070270559/ Also Jim we showcase the work Jimbo and the crew did on the latest Yacht! Thanks again for all the views and comments! Check out the most recent video! https://youtu.be/EiXGJvRHA0M Also some of the tools used in the shop here are linked below Festool router - https://www.youtube.com/channel/UCW3fiU8qsBuJhSl2jkuGy0w
Views: 455 DeBergerac Design
Jigs used to repair a Formica Surface
 
09:33
Jigs for formica surface repair can be easily done! in this weeks episode Jim showcases how to repair an imperfect job to a perfect one!
Views: 2018 DeBergerac Design
Acrylic Modification Using Jigs
 
05:39
Acrylic modifications is nothing for Jim here at Debergerac Design to tackle, in this weeks episode Jim walks us through how to properly cut Acryllic using a Jig and table saw. Here is another video on how to Cut Acrylic another way! https://youtu.be/yC1b6XPJaPI And check out last weeks episode showcasing our current projects here at Debegerac! https://www.youtube.com/watch?v=p9uAJiL0e-o Feel free to comment below and please share and subscribe! We look forward to hearing from you!
Views: 1142 DeBergerac Design
Part 1   Camera Frames Milling Aluminum With A Woodworking Router
 
09:58
This is a demonstration to show how you can cut aluminum with a router the same way you would if you were cutting wood.
Views: 442 DeBergerac Design
Custom Jewelry Dividers Made From Acrylic Using Simple Jigs
 
13:25
Custom jewelry dividers made from Acrylic using simple jigs is covered in this weeks video on the DeBergerac channel. Jim walks us through the gluing and use of the custom jigs in order to achieve a perfect piece! Last week video https://youtu.be/GvTT849ld4M The corner moulding's video https://youtu.be/v3cHjidnNwc Also some of the tools used in the shop here are linked below Festool router - https://www.youtube.com/channel/UCW3fiU8qsBuJhSl2jkuGy0w Texas Techno by Audionautix is licensed under a Creative Commons Attribution license (https://creativecommons.org/licenses/by/4.0/) Artist: http://audionautix.com/
Views: 12611 DeBergerac Design
Custom wood Vanity (PT.1)
 
14:26
Custom wood vanity's are being built with precision and impeccable technique here at the DeBergerac Shop! Here is Pt.2 https://youtu.be/yC1b6XPJaPI
Views: 1490 DeBergerac Design
Making a Pattern for Countertop
 
11:48
Making a pattern for a countertop on a yach is a breeze - In this video, Jim plays patternmaker as he shows you how to make a plywood template/pattern for countertops aboard motor yacht Polly. Here is last week video https://youtu.be/psUfYTyG5DE
Views: 2915 DeBergerac Design
5000 Subscribers!!! And We Finished The Yacht!
 
05:15
Thank you all so very much from Jim and DeBergerac crew! Its been a blessing and experience having all of you subscribe to the content we create! and we will now be coming at you with even more VIA Facebook and Instagram! Posting Behind the scenes in the stories and photos and short videos, check the links below to come check it out! Instagram www.instagram.com/yachtcarpentry Facebook https://www.facebook.com/DeBergerac-Design-302653070270559/ Also Jim we showcase the work Jimbo and the crew did on the latest Yacht! Thanks again for all the views and comments! Check out the most recent video! https://youtu.be/xMonV-dCq_k Also some of the tools used in the shop here are linked below Festool router - https://www.youtube.com/channel/UCW3fiU8qsBuJhSl2jkuGy0w
Views: 362 DeBergerac Design
Yacht Carpentry- Installing Cabinet Slider on a Yacht
 
16:14
FortLauderdaleYachtCarpentry.com | (850) 6-YACHTS | [email protected] In this video, we show you a "day in the life" at DeBergerac Design as our team installs a space-saving cabinet sliding rail on a client's motoryacht.
Views: 1986 DeBergerac Design
Hillsboro Million Dollar Mile!
 
07:11
Jim takes us on a tour of a Condo on the Hillsboro Million Dollar Mile! Showcasing all the to be renovations and upcoming projects associated with the renovation! Here is or most recent video https://youtu.be/M8KBWC72VEU
Views: 685 DeBergerac Design
Welcome to the DeBergerac Channel
 
01:06
This is the DeBergerac channel trailer, and were we pride ourselves on high quality work and unique and fantastic projects. Feel free to contact us a www.debergeracdesignchannel.com
Views: 1932 DeBergerac Design
Making a custom stock for a Baikal Side By Side .30.06 Rifle
 
21:48
In this video, we show you how we assembled, machined and finished a custom stock and matching forend for a Baikal Side By Side .30-06 rifle. PRODUCTS USED IN THIS PROJECT: Walnut hardwood, Electric carver, hand shapers, Mercury recoil reducer, end mills, epoxy, brass plate, long boring bit, Alliant milling machine, lots of luck and sweat!! , ESTIMATED PROJECT TIME: 2 weeks VISIT OUR WEBSITE AT DebergeracDesign.com for more custom carpentry and woodworking.e Thanks for watching, and don't forget to subscribe!
Views: 24758 DeBergerac Design
Polished Stainless Steel Hinged Frames
 
02:51
This is a short demonstration of the work required to make polished stainless steel frames. This is the first video in the series of this project. Thanks for watching. Thanks for watching. Stay Tuned!
Views: 315 DeBergerac Design
Welding Stainless Steel To Ensure A High Quality Polish
 
09:57
Welding stainless properly ensures a high quality polish when done correctly, in this weeks episode Jim walks us through how to ensure a high quality polish!
Views: 788 DeBergerac Design
How To Make A Jig For SOSS Hinges
 
07:06
This is a short demonstration on how to make jig for SOSS hinges two different ways.
Views: 10771 DeBergerac Design
Easy Dado Head Set Up
 
11:16
Easy Dado head set up is an instructional video on how to setup and stack dado heads using a dado head stand. Jim explains how it's made, but if you are interested in having your own stand customized by us, leave a comment below and we'll get back to you. Hope you Enjoy and Don't Forget to Subscribe! Check out out last video! https://youtu.be/biJ5H_EXiP0 Also some of the tools used in the shop here are linked below Festool router - https://www.youtube.com/channel/UCW3fiU8qsBuJhSl2jkuGy0w
Views: 1018 DeBergerac Design
Custom Bell Tower Table for a Yacht | Yacht Carpentry
 
04:45
FortLauderdaleYachtCarpentry.com | (850) 6-YACHTS | [email protected] In this video, we show you the installation and final product of a custom-built table for the belltower on a motoryacht, Murphy's Law. Want us to build one for your boat? Visit us at fortlauderdaleyachtcarpentry.com, email us at [email protected] or call us at 954-462-3427 for a free estimate.
Views: 616 DeBergerac Design
2 in 1! How to glue a table (No Mess) and More Texas Rebuild!
 
06:40
2 videos in 1 today! Jimbo showcases how to apply glue to a table with NO mess, and we see the work Jeff had done over in Texas! Check out the first Texas Video! https://youtu.be/WXRx5anIk50 Also some of the tools used in the shop here are linked below Festool router - https://www.youtube.com/channel/UCW3fiU8qsBuJhSl2jkuGy0w
Views: 516 DeBergerac Design
Mahogany Dog Gate (Pt 2)
 
08:29
Mahogany dog gate's are certainly unique! Check out this video that displays how to assemble the second half of our dog gate. I appreciate the feedback, share with your friends and if you have any questions, feel free to ask! Check out out last video! https://youtu.be/n_oD757xVYo Also some of the tools used in the shop here are linked below Festool router - https://www.youtube.com/channel/UCW3fiU8qsBuJhSl2jkuGy0w
Views: 1471 DeBergerac Design

Jobs applications for 15 year olds in memphis tn
What is a cover letter for a resume definition
Customer service sample cover letter
Sending cover letter by email
International sales coordinator cover letter